PTS series www.vishay.com vishay beyschlag revision: 08-dec-15 1 document number: 28762 for technical questions, contact: nlr@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 platinum smd flat chip temperature sensor PTS smd flat chip temperatu re sensors are the perfect choice for temperature contro l of electronics operating under varying environmental conditions. the highly controlled platinum thin film manufacturing process guarantees an outstanding stability of temperature characteristics which ensures reliable operation even under harsh conditions. features ? standardized characteristics according to iec 60751 ? advanced thin film technology ? short reaction times down to t 0.9 2 s (in air) ? outstanding stability of temperature characteristic ? supports lead (pb)-free soldering ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 applications temperature measurement and control in ? aviation electronics ? industrial electronics ? medical electronics notes (1) valid for sensor element only (2) indicated measurement currents can be applied continuously with self-heating effe ct of less then 0.1 c technical specifications description PTS 0603 PTS 0805 PTS 1206 resistance values r 0 at 0 c 100 100 , 500 100 , 500 , 1000 temperature coefficient (0 c to +100 c) +3850 ppm/k tolerance classes f0.3, f0.6 operating temperature range -55 c to +155 c long term stability r 0 / r 0 ; r 0 change after 1000 h at +155 c < 0.04 % insulation resistance > 10 m measurement current i meas. (dc) (2) 100 0.1 ma to 0.50 ma 0.1 ma to 1.0 ma 0.1 ma to 1.0 ma 500 - 0.1 ma to 0.40 ma 0.1 ma to 0.40 ma 1000 - - 0.1 ma to 0.25 ma self-heating (1) still air (v = 0 m/s) 0.9 k/mw 0.8 k/mw 0.7 k/mw thermal response time (1) flowing water (v = 0.4 m/s) t 0.5 0.1 s t 0.5 0.2 s t 0.5 0.3 s t 0.9 0.2 s t 0.9 0.3 s t 0.9 0.4 s flowing air (v = 3.0 m/s) t 0.5 1.0 s t 0.5 1.5 s t 0.5 2.0 s t 0.9 2.0 s t 0.9 3.0 s t 0.9 5.0 s
PTS series www.vishay.com vishay beyschlag revision: 08-dec-15 2 document number: 28762 for technical questions, contact: nlr@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in millimeters solder pad dimensions in millimeters description a homogeneous film of plati num is deposited on a high grade (al 2 o 3 ) ceramic substrate and conditioned to achieve the correct temperature coef ficient and stability. the sensor-elements are covere d by a protective coating designed for electrical, mechanical and climatic protection. the terminations receive a fina l pure matte tin on nickel plating, the immunity against tin whisker growth has been proven under extensive testing. quality the result of the determined production is verified by an extensive testing procedure performed on 100 % of the individual sensors. only accepted products are laid directly into the paper tape in accordance with iec 60286-3 . storage solderability is specified for 2 years after production or re-qualification. the permitte d storage time is 2 years. assembly the pt-sensors are suitable for processing on automatic smd assembly systems. they are suitable for automatic soldering using wave, reflow or vapour phase. the encapsulation is resistant to all cleaning solvents commonly used in the electro nics industry, including alcohols, esters and aqueous solutions. the suitability of conformal coatings, if applie d, shall be qualified by appropriate means to ensure th e long-term stability of the whole system. the use of potting resins in close contact with the coating or terminations is not allowed. for frequent high temperature usage, the rmal compatible substrates and solder alloys should be used , to minimize any thermal mismatch with the component. all products comply with the cefic-eeca-eicta list of legal restrictions on hazardous substances. this includes full compatibility with the following directives: ? 2000/53/ec end of vehicle life directive (elv) ? 2000/53/ec annex ii to end of vehicle life directive (elv ii) ? 2011/65/eu restriction of the use of hazardous substances directive (rohs) ? 2002/96/ec waste electrical and electronic equipment directive (weee) approvals the pt-sensors are tested in accordance with ? iec 60751 ? iec 60068 series dimensions - PTS sensor types, mass and relevant physical dimensions type h l w w t t t t b mass (mg) PTS 0603 0.45 + 0.1/- 0.05 1.55 +0.05 / -0.1 0.85 0.1 > 75 % of w 0.3 + 0.15/- 0.2 0.3 + 0.15/- 0.2 1.9 PTS 0805 0.45 + 0.1/- 0.05 2.0 0.1 1.25 0.15 > 75 % of w 0.4 0.2 0.4 0.2 4.6 PTS 1206 0.55 0.1 3.1 + 0.1/- 0.2 1.6 0.15 > 75 % of w 0.5 0.25 0.5 0.25 9.2 recommended solderpad dimensions type wave soldering reflow soldering gyxzgyxz PTS 0603 0.55 1.1 1.1 2.75 0.65 0.7 0.95 2.05 PTS 0805 0.8 1.25 1.50 3.2 0.9 0.9 1.4 2.7 PTS 1206 1.4 1.5 1.9 4.4 1.5 1.15 1.75 3.8 t b t t l h w w t g x y z
PTS series www.vishay.com vishay beyschlag revision: 08-dec-15 3 document number: 28762 for technical questions, contact: nlr@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) products can be ordered using either the part number or the product description (2) the part number is shown to facilitate the intr oduction of a unified part numbering system (3) please refer to table packaging (4) we recommend that the production description is used to minimize the possibility of errors in order handling functional performance the temperature resistance relationship s of the PTS series follow different equations: for the temperature range of -55 c up to 0 c: r t = r 0 x (1 + a x t + b x t 2 + c x ( t - 100 c) x t 3 ) and for the temperature rang e of 0 c up to +155 c: r t = r 0 x (1 + a x t + b x t 2 ) r t : resistance as a function of temperature r 0 : nominal resistance value at 0 c t : temperature in c coefficients according to iec 60751: a = 3.9083 x 10 -3 c -1 b = -5.775 x 10 -7 c -2 c = -4.183 x 10 -12 c -4 the tolerances values of the PTS series are classified by the following equations as specified by iec 60751: class f0.3 : t f0.3 = (0.30 + 0.005 x | t |) class f0.6 : t f0.6 = (0.60 + 0.010 x | t |) part number and product description (1) part number (2) : PTS060301b100rp100 type size code special character tolerance class resistance value packaging (3) special 3 digits 4 digits 1 digit 2 di gits 4 digits 2 digits 2 digits PTS = platinum temperature sensor smd 0603 0805 1206 0 = neutral 1b = class f0.3 2b = class f0.6 100r = 100 500r = 500 1k00 = 1000 pu p1 00 = standard product description (4) : PTS 0603-b p1 100r PTS 0603 -b p1 100r type size code tolerance class packaging (3) resistance value PTS = platinum temperature sensor smd 0603 0805 1206 b = class f0.3 2b = class f0.6 pu p1 100r = 100 500r = 500 1k = 1000 packaging type code quantity carrier tape width pitch box/reel box/reel diameter PTS 0603 PTS 0805 PTS 1206 pu 100 paper tape acc. iec 60286-3 8 mm 4 mm box 114 mm p1 1000 reel 180 mm/7" 06 s t p031b100rp100 0
PTS series www.vishay.com vishay beyschlag revision: 08-dec-15 4 document number: 28762 for technical questions, contact: nlr@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 nominal resistance value temperature r / r 0 ratio nominal resistance values class f0.3 class f0.6 r 0 100 r 0 500 r 0 1000 t tol. t tol. (c) ( )( )( ) (c) (c) -55 0.78319 78.32 391.59 783.19 0.58 1.15 -50 0.80306 80.31 401.53 803.06 0.55 1.10 -45 0.82290 82.29 411.45 822.90 0.53 1.05 -40 0.84271 84.27 421.35 842.71 0.50 1.00 -35 0.86248 86.25 431.24 862.48 0.48 0.95 -30 0.88222 88.22 441.11 882.22 0.45 0.90 -25 0.90192 90.19 450.96 901.92 0.43 0.85 -20 0.92160 92.16 460.80 921.60 0.40 0.80 -15 0.94124 94.12 470.62 941.24 0.38 0.75 -10 0.96086 96.09 480.43 960.86 0.35 0.70 -5 0.98044 98.04 490.22 980.44 0.33 0.65 0 1.00000 100.00 500.00 1000.00 0.30 0.60 5 1.01953 101.95 509.76 1019.53 0.33 0.65 10 1.03903 103.90 519.51 1039.03 0.35 0.70 15 1.05849 105.85 529.25 1058.49 0.38 0.75 20 1.07794 107.79 538.97 1077.94 0.40 0.80 25 1.09735 109.73 548.67 1097.35 0.43 0.85 30 1.11673 111.67 558.36 1116.73 0.45 0.90 35 1.13608 113.61 568.04 1136.08 0.48 0.95 40 1.15541 115.54 577.70 1155.41 0.50 1.00 45 1.17470 117.47 587.35 1174.70 0.53 1.05 50 1.19397 119.40 596.99 1193.97 0.55 1.10 55 1.21321 121.32 606.60 1213.21 0.58 1.15 60 1.23242 123.24 616.21 1232.42 0.60 1.20 65 1.25160 125.16 625.80 1251.60 0.63 1.25 70 1.27075 127.08 635.38 1270.75 0.65 1.30 75 1.28987 128.99 644.94 1289.87 0.68 1.35 80 1.30897 130.90 654.48 1308.97 0.70 1.40 85 1.32803 132.80 664.02 1328.03 0.73 1.45 90 1.34707 134.71 673.53 1347.07 0.75 1.50 95 1.36608 136.61 683.04 1366.08 0.78 1.55 100 1.38506 138.51 692.53 1385.06 0.80 1.60 105 1.40400 140.40 702.00 1404.00 0.83 1.65 110 1.42293 142.29 711.46 1422.93 0.85 1.70 115 1.44182 144.18 720.91 1441.82 0.88 1.75 120 1.46068 146.07 730.34 1460.68 0.90 1.80 125 1.47951 147.95 739.76 1479.51 0.93 1.85 130 1.49832 149.83 749.16 1498.32 0.95 1.90 135 1.51710 151.71 758.55 1517.10 0.98 1.95 140 1.53584 153.58 767.92 1535.84 1.00 2.00 145 1.55456 155.46 777.28 1554.56 1.03 2.05 150 1.57325 157.33 786.63 1573.25 1.05 2.10 155 1.59191 159.19 795.96 1591.91 1.08 2.15
PTS series www.vishay.com vishay beyschlag revision: 08-dec-15 5 document number: 28762 for technical questions, contact: nlr@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 - 75 0 175 0.60 temperature in c - 50 - 25 25 50 75 100 125 150 0.80 1.00 1.20 1.40 1.60 1.70 r / r 0 ratio r / r 0 0.70 0.90 1.10 1.30 1.50 PTS series - 75 0 175 temperature tol. in c temperature in c - 50 - 25 25 50 75 100 125 150 0.0 0.2 2.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 0.4 tolerances for classf0.3 and f0.6 r 0 tol. in % 0.0 0.1 1.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 0.2 f0.6 temp. tol. f0.6 r 0 tol. f0.3 r 0 tol. f0.3 temp. tol.
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
